Loading Rolls in the Roll Holder Slot
Once a roll is in the Roll Holder, follow these steps to load the roll in the Roll Holder Slot.
Holding the Roll Holder so that the side with the white gear faces the side of the Roll Holder Slot with a white
gear, load the Roll Holder shaft (a) into the grooves (b) on both ends of the Roll Holder Slot.
Caution
•
Be careful not to drop the roll and hurt yourself when loading it.
•
Be careful not to pinch your ngers between the Roll Holder shaft (a) and the guide grooves (b) when
loading rolls.
At this point, to advance the roll, see "Loading the Roll in the Printer". (→P.110)
Downloaded from ManualsPrinter.com Manuals
Handling rolls
Handling Paper 109