Change The Custom Erase Settings - StarTech.com SDOCK1EU3P User Manual

Change the custom erase settings

You can customize the erase settings that are applied when you select Custom Erase in
the Eraser mode menu, including setting the number of passes and selecting a pattern
number.
1. Use the Menu navigation buttons on the front of the eraser to move up and down
in the Erase mode menu.
2. Select Custom Erase and press the OK button.
3. Do any of the following:
• To select a pass number, select Setup Pass # and press the OK button. Use the
Menu navigation buttons to select a number between 1 and 99 and press the
OK button.
• To select a pattern count, select Setup Pattern and press the OK button. Use the
Menu navigation buttons to select a number between 1 and 99 and press the
OK button. Use the Menu navigation buttons to select a Data Pattern number
and press the OK button. Use the Menu navigation buttons to select a number
between 1 and 99. Press the OK button.
To return to the Erase mode menu, press the ESC button until you have exited the
Custom Erase settings.
Instruction Manual
6