Using The Utility Menu; View The Eraser Details; Update The Eraser Firmware - StarTech.com SDOCK1EU3P User Manual

Using the Utility menu

The SDOCK1EU3P includes a Utility menu that you can use to view information about
the eraser, including system and disk information.

View the eraser details

1. Use the Menu navigation buttons on the front of the eraser to move up and down
in the Erase mode menu.
2. Select Utility and press the OK button.
3. Do any of the following:
• To view the disk info, select Show Disk Info and press the OK button.
• To view the product name and current version of firmware, select System Info
and press the OK button.
To return to the Erase mode menu, press the ESC button until you have exited the
Utility menu.

Update the eraser firmware

1. Connect a USB 3.0 cable to your computer and the USB 3.0 port on the back of the
eraser.
2. Use the Power button on the back of the eraser to turn it on.
3. Place a Firmware drive in the drive bay.
Note: You can use any type of drive, provided that it's formatted to FAT32.
4. On your computer, copy the Firmware file to the drive in the eraser.
5. Use the Menu navigation buttons on the front of the eraser to move up and down
in the Erase mode menu.
6. Select Utility and press the OK button.
7. Select Update System and press the OK button.
8. When the LCD display says Complete, use the Power button to turn off the eraser.
9. Wait five seconds and turn on the eraser again.
To return to the Erase mode menu, press the ESC button until you have exited the
Utility menu.
Instruction Manual
7