Silvercrest SCAZ 5.00 A1 User Manual And Service Information page 20

Introduction
Make sure that the battery clicks into place on the charger. Next connect
the power cord to the charger and plug the power cord to a wall outlet.
Remove the rechargeable battery from the camera when
the device is not to be used for a long time.
During charging, the rechargeable battery and charging
device will become warm. This is not a malfunction.
The status indicator of the charging cradle will light orange whilst the
battery is charging. When the charging process is completed, the status
indicator will light green. You can then insert the rechargeable battery into
the camcorder. Depending on the charge level, the charging cycle can
take up to 3 hours.
If, after inserting the rechargeable battery, the indicator
remains green, this means the rechargeable battery is
already charged or it is not correctly inserted. In this case,
check the polarity.
18 -English
SCAZ 5.00 A1