Charging The Battery While Inserted In The Camcorder - Silvercrest SCAZ 5.00 A1 User Manual And Service Information

SCAZ 5.00 A1

Charging the Battery while Inserted in the Camcorder

It is also possible to recharge the camcorder battery via the USB power of
a computer. To do this, you'll need the supplied USB/AV cable.
Insert the rechargeable battery into the camcorder (see page 20).
Use the supplied USB/AV cable to connect the camcorder to an
available USB port on a computer.
Please make sure that your camcorder is powered off. If the device is
powered on, its battery will not recharge. If necessary, press the
On/Off button (15) to power the camcorder off.
The power indicator (4) will light red during charging. When the
charging process is completed, the power indicator will stop lighting.
Some computers do not supply USB power while they are
turned off. If the camcorder power indicator does not light,
make sure to power on your computer.
Introduction
English - 19