Audionet MAP v2.0 User Manual page 33

Now use keys and
Video outputs OUT1 and OUT2 7 provide the (Composite-)Video
Composite
signal from one of the video inputs IN1 to IN4 (default function
without Progressive Scan Card).
Video output OUT2 provides the C-Sync (Composite-Sync) signal for
C-Sync
RGB video output with C-Sync. Video output OUT1 has no signal in
this mode.
Video output OUT1 provides the V-Sync (Vertical Sync) signal and
H/V-Sync
OUT2 the H-Sync (Horizontal Sync) signal for RGB video output with
separate Sync signals.
Note: Please consult the user's manual of your video display (projector, video beamer,
plasma TV etc) connected to the MAP to decide which video output format is to be
used!
Connection diagram YUV video output:
If your video display has a video input for progressive Component or YUV video
signals, connect the MAP according to the following diagram:
VGA
OUT OUT
Y/R C
IN
OUT
U
to select desired option:
OUT IN 1
/G C /B
R B
IN IN
S-VIDEO 1
Y V
VGA
IN 2 IN 3 IN 4
VIDEO IN
S-VIDEO 4
S-VIDEO 2 S-VIDEO 3
ANALOG OUTPUTS
to video input of video display (3x Cinch)
alternative connection to video input of
video display (VGA)
Pinning: Pin #1 = U
Pin #2 = Y
Pin #3 = V
33
OPTICAL
OUT 1 OUT 2
VIDEO OUT
DIGITAL
OUT
(OSD)
S-VIDEO 1 S-VIDEO 2