Menu "Video Setup; Menu "Bass Manager - Audionet MAP v2.0 User Manual

Menu "Video Setup"

This menu adjusts global video options for the MAP, which are saved automatically
when switching off the unit to stand by mode and re-loaded automatically when
switching on. Select the 'Video Setup' menu by pressing key Video Setup.
LipSync Delay:
While using video processors in projectors, progressive scan modules etc. the video
signal may be delayed in reference to the audio signal, so that picture and sound are not
in sync any longer. Use keys
to get picture and sound in sync again. The delay can be adjusted from 0 to 100 msec in
steps of 0.5 msec.
Note: Adjusting the LipSync delay does not affect the delay settings of each output
channel relative to each other. It is only for synchronising picture and sound.
Set Video Input:
This it the same function as in the 'Channel Setup' menu. It's also integrated here for
easier access.
Note: The video input setting applies to each audio input channel independently! All
other video settings are set globally.
Set TV System:
For correct conversion from cinch video to S-Video please select the corresponding TV
System. Press key for NTSC. Press
All other items in the 'Video Setup' menu relate to an optional Progressive Scan Card.
Please refer to chapter "Progressive Scan Card".

Menu "Bass Manager"

Use items in the 'Bass Manager' menu to match the MAP to the speakers in your
system. Navigate through the menu using keys
.
Set Speakers:
Speaker settings are adjusted by channel groups:
Front =
Center =
Surr =
Back =
/ to adjust a delay of the audio output of the MAP
Front Left and Right
Center
Surround Left and Right
Back Left and Right
for PAL.
/ , select options with keys
23
/