Preferences / Setup - Audionet MAP v2.0 User Manual

Preferences / Setup

Description of all menu items
RUN mode:
This is the normal operation mode, if no menu is selected. Use
adjust the master volume. The display shows name and number of selected input
channel in the first line. The second line shows the current volume (see chapter
'Display').
Select Input:
Use up and down keys to select desired input channel. The input channels are aligned in
the following order: Analog In 1 to 6 16, Digital In 1 to 5 10, External 8ch In 11.
Listening Mode:
Use and keys to select the Listening Mode for Dolby Digital, Dolby Pro
Logic IIx, DTS decoding or DVD Audio (via Audionet HighBit Interface).
all program material is downmixed to mono
Mono:
reproduces 2-channel source material as 2-ch Stereo, turns off Dolby
Stereo:
Pro Logic IIx or DTS Neo:6 decoding, any other multichannel material
is downmixed to Stereo output (2/0 Lo/Ro). Mono signals are re-routed
from the Center channel to both Front Left and Right channels.
information on the Center channel is re-routed to Front Left and Right channels
Phantom:
reproduces audio programs using only the three front channels (L,C,R)
3Stereo:
reproduces all channels originally available in the program material, 2-channel
Surround:
Stereo is reproduced as Stereo (see table 'Overview Listening Modes').
Audionet D8: reproduces all available channels of the program material. Additionally,
material with stereo encoded surround channels is always extended to 7.1
channels. 2-channel Stereo is expanded by Dolby Pro Logic IIx or DTS
Neo:6 to 6.1 or 7.1 channels (see table 'Overview Listening Modes').
Party Mode: all input material is downmixed to 2-channel Stereo and distributed to
all available speakers as follows:
Front Left
Front Right =
Center
Note: With this Listening Mode mono signals can be reproduced in
every speaker.
Lt/Rt out: all program material is downmixed to Stereo output (2-ch Lt/Rt) for
later Dolby Pro Logic IIx or DTS Neo:6 decoding (recommended for
recording Dolby Digital / DTS programs on 2-channel recording
devices like VCRs)
Note: This menu is only available, if 'Internal Decoder' is set to 'active' or
DVD Audio playback.
= Surround Left
Surround Right =
= ½ Front Left + ½ Front Right
15
and
= Back Left
Back Right
keys to