Remote Control - Audionet MAP v2.0 User Manual

Remote control

All functions can be controlled by the included remote control. For detailed information
about usage and programming of the remote control please refer to its separate manual.
All keys on the remote control relevant for using the MAP are described in the
following.
While in RUN mode please use key
volume. While in RUN mode use
through the input channels. For direct access of inputs see below.
Press key to toggle muting. Muting and de-muting is done softly, i.e. volume will
decrease/increase slowly.
Note: These keys are also available while being in the main menu of the remote control!
Press key on the remote control to get into the main menu. On the touch screen you
will find a key named MAP. All keys relevant while listening, you will find on screen
pages 1 to 4. If you want to change any setup options, use keys on page 5. To change
any setting of the digital equalizer, please refer to page 6.
Note: While being in the device menu MAP of the remote control, use the arrow keys
and on the bottom of the touch screen to skip through the screen pages. The
first number displayed between the arrow keys is the number of the current screen page,
the second number shows the total number of pages available:
Navigate through a menu:
The device menu 'MAP' consists of 6 screen pages containing menu and control keys.
Pressing one of the menu keys will enter the corresponding menu option. To navigate
through the menu items, use keys
set key at the front panel. To select an option, use
up key at the front panel,
menu:
1. Press the same menu key again to get back to RUN mode.
2. Press any of the other menu keys to enter a new mode.
3. Wait for approx. 12 seconds. After this time MAP gets back to RUN mode
automatically.
to increase volume. Use key
and keys to skip forward and backward
and . Key
works like the down key. There are three ways to leave a
9
.
has the same function as the
and keys. works like the
to decrease