Note: This menu item is located in the menu 'Channel Setup', as it is a setting, that can
be selected for each input channel independently. Although the menu 'Video Setup'
deals with global video settings, the same function 'Set Video Input', as described
above, is also integrated into the 'Video Setup' menu, simply for an easier access.
Note: You can assign a video input to each audio input independently. To simplify this
procedure, select the desired video input for each audio input during the setup (of
channel levels, names, decoder settings etc) for this audio input.
Offset Adjust:
Use
and
keys to adjust the input channel offset. You can add gain or attenuate
each input channel independently within a range of +9...-9dB in order to compensate
different output levels of sources connected to the MAP.
Set Listening Mode:
This menu item has the same function as the key Listening Mode on the remote control
described above.
Digital Filter:
This menu item has the same function as the key Digital Filter on the remote control
described above.
Dynamic Range:
This menu item has the same function as the key Dyn. Range of the remote control
described above.
Set Dual Mono:
Select the preferred playback mode for DVD soundtracks in Dual Mono mode with the
and
keys.
CH1+CH2:
CH1 only::
CH2 only:
Note: This menu is only available, if 'Internal Decoder' is set to 'active'.
Edit Channel Name:
While in menu 'Channel Setup' proceed to this menu item by pressing key
item 'Dolby PLIIx Mode' is selected, or by pressing
Decoder' is selected.
For each input channel you can choose a name up to 14 characters in length (exception:
the name for the Monitor/Effects loop is up to 12 characters in length). A cursor ('^')
marks the current character to be changed by pressing
to move the cursor to the right onto the next character position. At the end of the
character string the cursor jumps back to the first position after pressing the key
Both Dual Mono channels are reproduced
Only Dual Mono channel 1 is reproduced
Only Dual Mono channel 2 is reproduced
18
if menu
while menu item 'Set
and
keys. Press key
.
Need help?
Do you have a question about the MAP v2.0 and is the answer not in the manual?