Audionet MAP v2.0 User Manual page 27

The first line shows information about the current decoder mode:
Display
Test Tone on
PCM 2-Ch Stereo
A/D conv 2ch
Dolby PLIIx Movie
Dolby PLIIx Music
Dolby PLIIx Matrx
Dolby Pro Logic
DTS Neo:6 Cinema
DTS Neo:6 Music
Dolby Digital
Dolby Digital EX
Dolby D+PLIIx Mov
Dolby D+PLIIx Mus
Dolby D+PLIIx Mtx
Dolby Digital + PL Dolby Digital with Pro Logic IIx in 'Pro Logic' mode
Dolby D 2-ch St
D T S
DTS-ES Discrete
DTS-ES Matrix
DTS+Neo:6 Cinema
DTS+Neo:6 Music
DTS 96/24
DTS 96/24 + D8
DTS 2-ch Stereo
Audionet VIP HighBit MAP receives audio data via the Audionet HighBit
On the left of the second line the program format of the input signal is displayed by
'm/n.x', with m = number of front channels, n = number of surround channels and x =
1, if LFE channel (Low Effects Frequency channel) available or x = 0, if LFE is not
available in the program material.
While receiving digital input signals, the current sample rate (in kHz) is shown in the
middle of the second line.
Decoder mode
Test tone generator is active
Stereo PCM input signals
2-channel PCM is played back as stereo signal
Analog to digital converted stereo signal
Dolby Pro Logic IIx in 'Movie' mode
Dolby Pro Logic IIx in 'Music' mode
Dolby Pro Logic IIx in 'Matrix' mode
Dolby Pro Logic IIx in 'Pro Logic' mode
DTS Neo:6 in 'Cinema' mode
DTS Neo:6 in 'Music' mode
Bitstream input signals
Dolby Digital
Dolby Digital EX
Dolby Digital with Pro Logic IIx in 'Movie' mode
Dolby Digital with Pro Logic IIx in 'Music' mode
Dolby Digital with Pro Logic IIx in 'Matrix' mode
Dolby Digital played back as 2-channel stereo signal
DTS Digital Surround
DTS-ES Discrete
DTS-ES Matrix
DTS with Neo:6 in 'Cinema' mode
DTS with Neo:6 in 'Music' mode
DTS 96/24
DTS 96/24 with Audionet D8
DTS played back as 2-channel stereo signal
Input signals via Audionet HighBit interface
interface from DVD player Audionet VIP
27