Front Bezel Security - HP ProDesk 600 G1 Tower Maintenance And Service Manual

Front bezel security

The front bezel can be locked in place by installing a security screw provided by HP. To install the
security screw:
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Remove the security screw from the side of the hard drive bay just behind the front panel.
4.
Install the security screw through the middle front bezel release tab to secure the front bezel in
place.
38 Chapter 5 Removal and replacement procedures: Tower (TWR)
(Preparation for disassembly on page
(Access panel on page 37)
36).