Connecting The Cables; Adjusting The Monitor - HP LE2201w User Manual

Connecting the Cables

1. Place the monitor in a convenient, well-ventilated location near the computer.
2. Connect a VGA signal cable or DVI-D signal cable.
NOTE:
either analog or digital input. The video mode is determined by the video cable used. The monitor
will automatically determine which inputs have valid video signals. The inputs can be selected by
pressing the
pressing the
●
●
3. Connect the built-in monitor speakers (on select models) to the computer using the audio cable.
NOTE:
4. Connect one end of the power cable to the AC power connector on the back of the monitor, and
the other end to an electrical wall outlet.

Adjusting the Monitor

Tilt the monitor's panel forward or backward to set it to a comfortable eye level.
Figure 3-3
ENWW
Downloaded from ManualMonitor.com Manuals
For models with both VGA and DVI-D connectors, the monitor is capable of supporting
+ (Plus) button on the front panel or through the On-Screen Display (OSD) feature by
Menu button.
For analog operation, use the VGA signal cable provided. Connect the VGA signal cable to
the VGA connector on the rear of the monitor and the other end to the VGA connector on the
computer.
For digital operation, use the DVI-D signal cable (not provided) (select models). Connect the
DVI-D signal cable to the DVI connector on the rear of the monitor and the other end to the
DVI connector on the computer.
An optional speaker bar that mounts on to the monitor is available from HP.
Tilting the Monitor
Connecting the Cables 7