Installing the .INF and .ICM Files
After you determine that you need to update, you can install the .INF and .ICM files from the CD or
Installing from the CD
To install the .INF and .ICM files on the computer from the CD:
Insert the CD in the computer CD-ROM drive. The CD menu is displayed.
View the Monitor Driver Software Readme file.
Select Install Monitor Driver Software.
Follow the on-screen instructions.
Ensure that the proper resolution and refresh rates appear in the Windows Display control panel.
You may need to install the digitally signed monitor .INF and .ICM files manually from the CD
in the event of an installation error. Refer to the Monitor Driver Software Readme file on the CD.
Downloading from the Worldwide Web
To download the latest version of .INF and .ICM files from the HP monitors support Web site:
Follow the links for the monitor to the support page and download page.
Ensure the system meets the requirements.
Download the software by following the instructions.
Using the Auto-Adjustment Function
You can optimize the screen performance for the VGA (analog) input by using the
monitor and the auto-adjustment pattern software utility on the CD provided.
Do not use this procedure if the monitor is using a DVI input. If the monitor is using a VGA (analog)
input, this procedure can correct the following image quality conditions:
Fuzzy or unclear focus
Ghosting, streaking or shadowing effects
Faint vertical bars
Thin, horizontal scrolling lines
An off-center picture
Chapter 4 Operating the Monitor
Downloaded from ManualMonitor.com Manuals
and select the country region.
button on the