To use the auto-adjustment feature:
1.
Allow the monitor to warm up for 20 minutes before adjusting.
2.
Press the
●
●
3.
Insert the CD in the disc drive. The CD menu is displayed.
4.
Select Open Auto-Adjustment Software. The setup test pattern is displayed.
5.
Press the
6.
Press the
ENWW
Downloaded from ManualMonitor.com Manuals
-/Auto
button on the monitor front panel.
You can also press the
Menu
Refer to
Adjusting the Monitor Settings on page 15
If the result is not satisfactory, continue with the procedure.
-/Auto
button on the monitor front panel to produce a stable, centered image.
ESC
key or any other key on the keyboard to exit the test pattern.
button, then select Image Control from the OSD Main Menu.
in this chapter.
Using the Auto-Adjustment Function
13