Download  Print this page


To attach the monitor to a swing arm, insert four 10mm screws through the holes on the swing arm
plate and into the mounting holes on the monitor.
Figure 3-5
To attach the monitor to other mounting fixtures, follow the instructions included with the mounting
fixture to ensure that the monitor is safely attached.
a third-party mounting solution to the monitor, four 4 mm, 0.7 pitch, and 10 mm long screws are
required (not provided with the monitor). Longer screws must not be used because they may
damage the monitor. It is important to verify that the manufacturer's mounting solution is compliant
with the VESA standard and is rated to support the weight of the monitor display panel. For best
performance, it is important to use the power and video cables provided with the monitor.
Reconnect the cables to the monitor panel.
Downloaded from Manuals
Installing the Monitor on a Swing Arm
This monitor supports the VESA industry standard 100 mm mounting holes. To attach
Mounting the Monitor Panel


Table of Contents

   Also See for HP LE2201w

   Related Manuals for HP LE2201w

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments: