Led Indicators; Injector Rear Panel - Planet POE-2400G User Manual

The following is the summary table of Reset button
Reset Button Pressed and Released
About 1 second
About 10 second
Be sure that you backup the current configuration of PoE Injector Hub before reset PoE Injector
Hub; else the entire configuration will be erased when pressing the "RESET" button.
The factory default IP address and login account as following.

2.1.2 LED Indicators

The front panel LEDs indicates instant status of system power, Management port Link/Active and PoE port links, helps
monitor and troubleshoot when needed.
LED Color
FAN Alert Green
Power Alert Green
Power Green
PoE In-use Green

2.1.3 Injector Rear Panel

The rear panel of the PoE Injector Hub indicates an AC inlet power socket, which accepts input power from 100 to 240V
AC, 50/60Hz. Figure 2-1-4 & 2-1-5
functions:
Reboot the PoE Injector Hub.
Reset the PoE Injector Hub to Factory Default configuration.
The PoE Injector Hub will reboot and load the default IP
settings as below.
Function
Lights to indicate FANs have been stop.
Lights to indicate one of power supply has failure.
Lights to indicate power on.
Lights to indicate that the port is in use and supplying 48V DC power.
shows rear panel of the PoE Injector Hub.
Figure 2-1-4 POE-1200G Rear Panel
Figure 2-1-5 POE-2400G Rear Panel
User's Manual of POE-1200G / POE2400G
Function
11