Introduction; Package Contents; Product Description - Planet POE-2400G User Manual

1.1 Package Contents

CHECK THE CONTENTS OF YOUR PACKAGE FOR FOLLOWING PARTS:
The PoE Injector Hub x 1
●
The Quick Installation Guide x 1
●
User's Manual CD x 1
●
Power Cord x 1
●
Rubber Feet x 4
●
Two Rack-mounting brackets with attachment screws x1
●
If any of these are missing or damaged, please contact your dealer immediately, if possible, retain the carton including the
original packing material, and use them against to repack the product in case there is a need to return it to us for repair.
In the following section, the term "PoE Injector Hub" means the two Gigabit PoE Injector Hub devices, i.e. POE-1200G,
POE-2400G. Terms with lower case "injector" means any IEEE 802.3af power injectors. "PD" means the abbreviated from
IEEE 802.3af powered device.

1.2 Product Description

The POE Injector Hub are 12 / 24-Port IEEE 802.3af Power over Ethernet Mid-Span injector hub complies with IEEE 802.3,
IEEE 802.3u, IEEE 802.3ab and IEEE 802.3af standards. It is equipped with 12 / 24 10/100/1000Mbps Gigabit Ethernet
ports that support full 48VDC power for any remote IEEE802.3af powered device (PD) like 802.11b/g/n Wireless LAN
Access Point, IP phone, LAN Camera or any other network devices. The POE Injector Hub should provide the sufficient
15.4 Watts power each port to the 12 / 24 remote PD devices with 190 / 380 Watts power supply.
The PoE Injector Hub is installed between a regular Ethernet switch and the powered devices, injecting power without
affecting the data transmit. It offer a cost effective solution and quickly way to upgrade network system to IEEE 802.3af
Power over Ethernet, without replace the existing Ethernet Switch.
There are 24 / 48 RJ-45 STP ports on the front panel of PoE Injector Hub, 12 / 24 of them on lower stack are "Data" ports
and the other 12 / 24 ports on upper stack are "Data + Power output" ports. Each of the "Data + Power output" port on
upper stack functions as an injector which inserts DC Voltage into the CAT 5e/6 cable allowing the cable between the
Injector and Splitter to transfer data and power simultaneously.
To manage your powered devices, the PoE Injector Hub provides both Web management interfaces in which
administrators can manage functions such as port Enable/Disable, port priority, limit, schedule, system configuration,
Username/Password changing and with smart feature for powered device, the Hub can auto detect the power status on
each port and show massages Web management interface. These features also provided a cost-effective way to manage
the devices from Internet whenever you are at work or at home.
User's Manual of POE-1200G / POE2400G

1. INTRODUCTION

5