Planet POE-2400G User Manual page 42

• Power Reservation
• Port Status
• Device Class
• Current Used [mA]
• Powered Used [W]
• Priority
• Refresh
Table 4-5-3 Descriptions of the Poe Status Web page screen Objects
PD Classifications
A PD may be classified by the PSE based on the classification information provided by the PD. The intent of PD
classification is to provide information about the maximum power required by the PD during operation. Class 0 is the default
for PDs. However, to improve power management at the PSE, the PD may opt to provide a signature for Class 1 to 3.
The PD is classified based on power. The classification of the PD is the maximum power that the PD will draw across all
input voltages and operational modes.
A PD shall return Class 0 to 3 in accordance with the maximum power draw as specified by
Class
0
1
2
3
4
Class 4 is defined but is reserved for future use. A Class 4 signature cannot be provided by a
compliant PD.
Show the total Watts usage of PoE Injector Hub.
Shows the port's status on / off.
Class 0 is the default for PDs. However, to improve power management at the
PSE, the PD may opt to provide a signature for Class 1 to 3.
The PD is classified based on power. The classification of the PD is the maximum
power that the PD will draw across all input voltages and operational modes. A PD
shall return Class 0 to 3 in accordance with the maximum power draw as specified
by Table 4-5-4.
It shows the PoE device current Amp.
It shows the PoE device current watt.
Set port priority for the POE power management.
It can choose the "port priority", value is "1~4". The highest priority is "1".
Press this button to refresh current Web page.
Usage Range of maximum power used by the PD
Default 0.44 to 12.95 Watts
Optional 0.44 to 3.84 Watts
Optional 3.84 to 6.49 Watts
Optional 6.49 to 12.95 Watts
Not Allowed Reserved for Future Use
Table 4-5-4 Device class
User's Manual of POE-1200G / POE2400G
42
Table 4-5-4.