4.5.1 PoE Configuration
This section provides PoE (Power over Ethernet) Configuration and PoE output status of PoE Injector Hub, screen in
Figure 4-5-2
appears and
Table 4-5-2
Object
• Power limit mode
• Over Temperature
Protection
• Temperature 1 Setting
• Temperature 2 Setting
• PoE Function
• Priority
describes the PoE Configuration object of PoE Injector Hub.
Figure 4-5-2 PoE Configuration Web page screen
Description
Allow to configure power limit mode of Web Smart Device. It can choose :
Port Priority Deliver PoE power by port priority setting
Total Limit. Set limit value of the total POE port provided power to the PDs.
For POE-1200G, the total PoE power reservation from Port-1~12 is up to 190W.
For POE-2400G, the total PoE power reservation from Port-1~24 is up to 380W.
Enabled to prevent system too hot to damage.
Allow to set temperature of maximum prevention.
Allow to set temperature of minimum prevention (Only for POE-2400G).
Can enable or disable the PoE port.
Set port priority for the POE power management.
It can choose the "port priority", value is "1~4". The highest priority is "1".
39
User's Manual of POE-1200G / POE2400G