CyberData 3COM VCX PBX Server Manual page 13

7. After clicking on the Save Settings button, a reboot timer countdown will begin.
8. After the Intercom reboots, the green Status LED will blink at one second intervals to indicate
9. To test the Intercom, complete the following steps:
•
•
•
•
This step completes the procedure.
Server Setup Guide
normal operation.
Note If Yes is selected for Speaker Beep After Initialization on the Setup page of the
Intercom (not shown), you will hear a tone after the initialization sequence is complete.
Pick up any phone that is configured to the VCX system and call the Intercom's extension
number.
When a connection is established (as indicated by a beep), speak into the phone and verify
that you can hear your voice through the Intercom.
Hang up the phone and press the Call Button on the Intercom.
When the phone rings, pick up the phone. Speak into the phone and verify that you can
hear your voice through the Intercom.
Figure 12. Reboot Timer
930288A CyberData Corporation
13