Pro-Form 475 Audio Series User Manual page 23

THE INFORMATION MODE
The console features an information mode that keeps
track of treadmill usage information and allows you to
select a unit of measurement for the console.
To select the information mode, insert the key into the
console while holding down the Stop button, and then
release the Stop button. When the information mode is
selected, the following information will be shown:
An "E" (for English miles) or
an "M" (for metric kilometers)
will appear in the lower right
display. Press the Speed in-
crease button to change the
unit of measurement, if de-
sired.
Note: The console features a display demo mode, de-
signed to be used if the treadmill is displayed in a
store. While the demo mode is turned on, the console
will function normally when you plug in the power cord,
switch the reset/off circuit breaker to the reset position,
and insert the key into the console. However, when
you remove the key, the displays will remain lit, al-
though the buttons will not function. If the demo mode
is turned on, a "d" will appear in the lower right display
while the information mode is selected. To turn on or off
the demo mode, press the Speed decrease button.
The upper display will show
the total number of hours
that the treadmill has been
used.
The lower left display will
show the total number of
kilometers (or miles) that the
walking belt has moved.
To exit the information mode, remove the key from the
console.
THE OPTIONAL CHEST PULSE SENSOR
The chest pulse sensor offers hands-free operation,
and enables you to use the console's four heart rate
programs. To purchase the optional chest pulse
sensor, please see the dealer contact information on
the back cover of this manual or on the included service
card.
23