Removing An Expansion Card - Dell PowerEdge T630 Owner's Manual

CPU Card Priority
10

Removing an expansion card

Prerequisites
1. Ensure that you read the
2. Follow the procedure listed in
3. Remove the expansion card holder.
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
Steps
1. If installed, disconnect the data cables from the PERC card and/or the power cables from the GPU
card.
2. Press the expansion card latch and push the latch towards the back to open it.
3. Hold the expansion card by its edge, pull the card up to remove it from the expansion card
connector and the system.
4. Install the filler brackets by performing the following steps:
a. Align the slot on the filler bracket with the tab on the expansion card slot.
b. Press the expansion card latch till the filler bracket locks into place.
NOTE: Filler brackets must be installed in empty expansion-card slots to maintain FCC
certification of the system. The brackets also keep dust and dirt out of the system and aid in
proper cooling and airflow inside the system.
88
Card Type
Non-RAID
Safety instructions.
Before working inside your
Slot Priority
3, 4, 6, 7, 1
system.
Maximum
Allowed
5