Removing Caster Wheels - Dell PowerEdge T630 Owner's Manual

Figure 10. Removing and installing caster wheels
1. slots on base of the tower (4)
3. screw (2)

Removing caster wheels

Prerequisites
1. Ensure that you read the
2. Keep the #2 Phillips screwdriver ready.
3. Lay the system on a flat, stable surface with the wheels extending beyond the edge of the surface.
Steps
1. Remove the screw securing the front wheel unit to the base of the chassis.
2. Offset the front wheel unit slightly to the back of the system to release the retention hooks, and pull
out the front wheel unit.
3. Remove the screw securing the back wheel unit to the base of the chassis.
4. Offset the back wheel unit slightly to the front of the system to release the retention hooks, and pull
out the back wheel unit.
50
Safety instructions.
2. wheel assembly unit (2)