Lantronix PremierWave Quick Start Manual page 10

4. Select Assign a specific IP address and click Next.
5. Enter the IP address.
The Subnet mask appears automatically based on the IP address.
You may change it. On a local network, you can leave the Default gateway blank (all zeros).
6. Click Next.
7. Click Assign and wait several seconds until a confirmation message appears.
8. Click Finish.
9. Select the PremierWave from the main window list and click ToolsPing. The results
appear in the Status area.
PremierWave® Evaluation Board Quick Start
Assigning an IP Address
10