LifeFitness Club Series Assembly Instructions Manual page 5

Hide thumbs Also See for Club Series:

Step 1

Before proceeding, familiarize yourself with the

parts of the Cross-Trainer and make sure that you

have received all the items described in the Parts

List.

Step 2

Locate the left and right FRONT COVER (#9,

#10). Using two PHILLIPS PAN HEAD SCREWS

(#3), mount the USER LEFT FRONT COVER (#9)

to the FRAME (A). Attach the USER RIGHT

FRONT COVER (#10) to the FRAME in the same

manner using two PHILLIPS PAN HEAD

SCREWS (#3). Secure the tops of the FRONT

COVERS together using two PHILLIPS PAN

HEAD SCREWS (#3).

Step 3

Locate the RIGHT USER ARM (#12). Snap the 2-PIN CONNEC-

TOR (2PA) located at the bottom of the RIGHT USER ARM into the

2-PIN CONNECTOR (2PB) positioned at the top of the RIGHT

ROCKER ARM (B). Feed the connectors and excess cable up into

the RIGHT USER ARM. Secure the RIGHT USER ARM to the

RIGHT ROCKER ARM using three HEX SOCKET HEAD CAP

SCREWS (#1) and INTERNAL TOOTH LOCK WASHERS (#18).

Repeat the procedure for the LEFT USER ARM (#11) and LEFT

ROCKER ARM (C). Tighten all screws securely.

CAUTION: BE CAREFUL NOT TO PINCH THE WIRE

HARNESSES WHEN ASSEMBLING THE USER ARMS

(#11 & #12) TO THE ROCKER ARMS (B & C).

MISE EN GARDE : VEILLEZ À NE PAS PINCER LEFAIS-

CEAU DE CÂBLES LORS DE L'ASSEMBLAGEDES

POIGNÉES MOBILES (Nº 11 et 12) ET DES BRASBASCU-

LANTS (B ET C).

Table of Contents