Mighty Mule 500 UL325 SERIES Installation Manual page 20

Push-to-Open Installation
Mounting Push-to-Open Opener to Gate
Your Property
6
CLOSE gate and re-attach opener with clevis pin. Check
for level. Clamp securely.
8
Mark middle of post bracket slots on fence post. Mark middle of
gate bracket slots on gate cross support.
10
Drill holes completely through gate post and gate cross support.
7
1
O
Secure post pivot bracket to post bracket when clearance is OK
(Step 5) in both open and closed positions.
9
Remove clamps, post, gate brackets, and opener. Then use a
hammer and center punch to mark hole positions.
11
P
Attach post bracket assembly to fence post. NOTE: Must be
through bolted.
17
U
N
Z
Y
S
R