Mighty Mule 500 UL325 SERIES Installation Manual page 17

Gate Opener Installation
Mounting Pull-to-Open Opener to Gate
Your Property
6
OPEN gate and re-attach opener with clevis pin. Check for level.
Clamp securely.
8
Mark middle of post bracket slots on fence post. Mark middle of
gate bracket slots on gate cross support.
10
Drill holes completely through gate post and gate cross support.
7
2
Secure post pivot bracket to post bracket when clearance is OK
(Step 5) in both open and closed positions.
9
Remove clamps, post, gate brackets, and opener. Then use a
hammer and center punch to mark hole positions.
11
Y
S
R
Attach post bracket assembly to fence post. NOTE: Must be
through bolted.
14
U
O
N
Z
P