Mighty Mule 500 UL325 SERIES Installation Manual page 32

Control Box Settings
Setting Personal Transmitter Code
3
Replace and secure back cover of the opener remote.
5
AUTO CLOSE TIME
OFF
SOFT START OFF
WARNING
1
OPEN
SLV OPEN
MODE1
MODE2
Release the remote button, then release the "LEARN RMT"
button. The new code is now programmed. Fill in boxes below
with your transmiter code for your records.
Example
1 2 3 4 5 6 7 8 9
Fill In Code For Your Records
1 2 3 4 5 6 7 8 9
STALL FORCE
STATUS
LEARN RMT
120 MIN MAX
S3
ON
OFF ON
LEARN
PULL PUSH
MAST LIMIT
DLY. SIMULT.
OFF ON
S2
OFF ON
4
Go to control box. Press and hold the remote and "LEARN RMT"
buttons simultaneously for 5 seconds or until the alarm sounds.
6
2
Replace control box cover.
This device complies with FCC rules Part 15.
Operation is subject to the following conditions:
1. This device may not cause harmful interference.
2. This device must accept an interference that
may cause undesired operation.
Transmitter distance may vary due to circumstances
beyond our control. NOTE: The manufacturer is
not responsible for any radio or TV interference
caused by unauthorized modifications to
this equipment. Such modifications could
void the user's authority to operate
29
AUTO CLOSE TIME STALL FORCE
LEARN RMT
120 MIN MAX
SOFT START OFF ON
WARNING OFF ON
OPEN PULL PUSH
MAST LIMIT
SLV OPEN DLY. SIMULT.
MODE1 OFF ON
MODE2 OFF ON
FCC Regulation
the equipment.
STATUS
S3
LEARN
S2