Clock And Timer - Maytag CWG3100 User Manual

SETTING THE CLOCK AND TIMER
Clock
To set the time-of-day dock:
1. Press the CLOCK pad once. The words "Set
Time" wlll flash in the display.
2. Set the correct time of day using the • and
• pads.
• To change the time by one minute,
press either pad once.
• To change the time in increments of I0
minutes, press and hold either pad.
When the power is first supplied to the oven or
ff there has been a power failure, the display
will flash. Follow above instructions to set the
clock. The clock time cannot be changed when
the oven is set for a cook or timing operation.
Cancel the operation to set the clock.
Press the CLOCK pad to recall the time of day
when another function is displayed.
Timer
To set the timer.
1. Press the TIMER pad once. The words "Set
Timer" will flash in the display.
2. Set the desired time using the • and •
pads.
• Press either pad once to change the
tlme by I minute (if the Timer is set for
up to I hour), 5 minutes (ff the Timer is
set for over I hour), or 10 minutes (ff
the Timer is set for over 2 hours).
• Press mid hold either pad to change
the time in 5 minute or 10 minute in-
crements, depending upon the time set
in the display.
The TIMER can be set from I minute (0HR:01)
up to 9 hours and 50 minutes [9 HR:50).
The timing operation will start automatically.
Colons will flash in the display to indicate a
timing operation. One long continuous beep
will signal the end of the timing operation and
"End" will briefly appear in the display. The
time of day will automatically reappear in the
display. The TIMER pad does not control the
oven.
To cancel: Press and hold the TIMER pad for
3 seconds. The time of day will reappear after
a slight delay.
PAGE 6