Setting The Clock And Timer - Maytag CWE6800A User Manual

Cook Time/Stop Time Pads
These pads are used to program the oven to start and To set the timer:
stop automatically, either immediately or at a later time.
1. Press the TIMER pad once. The Indicator Word
For detailed information on using Programmed Oven TIMER will flash and "OHR:O0" appears in the
Operations, see page 8. display.
Self Clean Pad The timer can be set from 1 minute up to 11 hours
This pad is pressed to set the oven for a self:dean cycle, and 55 minutes.
See pages 9-10 for detailed information on the self- 2. Set the desired time using the • and • pads. (If
clean feature, more than 15 seconds elapses between pressing the
TIMER pad and the • pad, the TIMER pad must
BroU Pad
be pressed again.)
Use this pad to select broil. See page 7 for more broiling
information.
Bake Pad
The oven temperature is set by pressing this pad and
the • or • pad. Additional baking and roasting
information can be found on page 6.
Convect Pad (select models)
Press this pad to select convection baking and roasting.
Set the oven temperature by pressing the • or • pad.
See page 6 for more information on convection cooking.
Setting the Clock and Timer
Clock
To set the time-of-day clock:
1. Press the CLOCK pad once. The Indicator Word
TIME will flash in the display.
"2. Set the correct time of day using the • and • pads.
(If inore than 15 seconds elapses between pressing
the CLOCK pad and the • and • pads, the
CLOCK pad must be pressed again.)
NOTE: Four seconds later the time of day will
automatically be entered.
To cancel timer:
To change time of day set on the clock: Repeat
steps 1 and 2 above. 1. Press and hold TIMER pad for three seconds.
Tile clock time cannot be changed when the oven is set OR
for a programmed oven operation or self-clean 2. a. Press TIMER pad and
operation. Cancel the operation to set the clock, b. Press and hold • pad until time is returned to
Press the CLOCK pad to recall the time of day when "00". _ . .......
auother function is displayed. _--
Timer ;_
The timer can be used independently of any"other oven
actMty and eau be set while another oven function is
operating. The timer does not control the oven.
PAGE