Selecting A User; Adjusting The Built-In Clock Before Use - A&D UB-533 Instruction Manual

2. Selecting a User

1. Press the button when turning off the device. The indicator
SET
2. Select a user from user
Press the button to turn off the device.
START
After three minutes of non-operation, the device will turn off automatically.

3. Adjusting the Built-in Clock Before Use

1. Press and hold the
2. Select the year using the
Press the button to set the current year and move to month/day selection.
SET
The date can be set anywhere between the years 2010 and 2059.
3. Select the month using the
Press the button to set the current month and move to day selection.
SET
4. Select the day using the
Press the button to set the current day and move to hour/minute selection.
SET
5. Select the hour using the
Press the button to set the current hour and move to minute selection.
SET
6. Select the minute using the
button to proceed to "6.The C.P.G.Function Switch".
Press the
SET
Holding down the button will change the value continuously.
Pressing the
START
Notes: After three minutes of non-operation, the device will turn off automatically.
When the clock has not been set,
When removing the batteries, preset parameters (of clock, user and my C.P.G.) are reset.
Using the Monitor
and user using the
button until the year starts blinking.
SET
button.
button.
button.
button.
button.
button will turn the device off anytime.
is indicated for the clock display.
or is blinking.
button.
SET
English 9
Turn off
button
SET
User or User
button
START
Press and hold button
SET
Year
button
button
SET
Month
button
button
SET
Day
button
button
SET
Hour
button
button
SET
Minute
button
button
SET
The operation proceeds to "6.
The C.P.G. Function Switch".