This program copies a source floppy disk to a target floppy disk.
3.
DUMP
This program displays the contents of a floppy disk (both 3.5-inch and 5.25-inch) and the
designated sectors of the hard disk.
3.20.2 Operations
1.
Select the FDD UTILITIES function from the DIAGNOSTICS MENU and press Enter.
The following message will be displayed.
[ FDD UTILITIES ]
1 : FORMAT
2 : COPY
3 : DUMP
9 : EXIT TO DIAGNOSTICS MENU
PRESS [1] - [9] KEY
2.
FORMAT program
(1)
Selecting FORMAT displays the following message.
DIAGNOSTICS - FLOPPY DISK FORMAT : Vx.xx
Drive number select (1=A:,2=B:) ?
(2)
Select a drive number and press Enter to display the following message.
Type select (0:2DD-2DD,1:2D1-2D,2:2D-2HD,3:2HD-2HD) ?
(3)
Select a media/drive type number and press Enter. A message similar to the one
below will be displayed.
Warning : Disk data will be destroyed.
Insert work disk into drive A:
Press any key when ready.
(4)
Remove the Diagnostics Disk from the FDD, insert the work disk, and press any key.
The following message will be displayed when the FDD format is executed.
[ FDD TYPE ] : TRACK
[ FDD TYPE ] : HEAD
[ FDD TYPE ] : SECTOR = xx
3-46
Format start
= xxx
= x