Log Utilities; Program Description; Operations - Toshiba T2000 Maintenance Manual

press Enter.
3. When the Cleaning start message appears, the FDD head cleaning has started.
4. The display automatically returns to the DIAGNOSTICS MENU when the function is
completed.

3.18 Log Utilities

3.18.1 Program Description

This program logs error information generated while a test is in progress and stores the results in
RAM. If the POWER switch is turned off, the error information will be lost. The error informa-
tion is displayed in the following order:
1. Error count (CNT)
2. Test name (TS-NAME)
3. Subtest number (TS-NAME)
4. Pass count (PASS)
5. Error status (STS)
6. FDD/HDD or memory address (ADDR)
7. Write data (WD)
8. Read data (RD)
9. HDC status (HSTS)
10. Error status name ([ERROR STATUS NAME])
This program can store data on a floppy disk or output the data to a printer.

3.18.2 Operations

1. Select the LOG UTILITIES function from the DIAGNOSTICS MENU and press Enter.
The error information logged in RAM or on the floppy disk is displayed as shown below.
XXXXX ERRORS
CNT TS-NAME PASS
001 FDD 02 0000
001 FDD 01 0000
3-42
STS ADDR WD RD HSTS [ERROR STATUS NAME ]
103 00001 00 00
180 00001 00 00
Address
Error status
FDD - WRITE PROTECTED
FDD - TIME OUT ERROR