Toshiba T2000 Maintenance Manual page 110

COM2
Not Used
NOTE: You can assign a COM level only once. For example, the Serial Port and
Built-in Modem cannot both be assigned to COM1.
4. HARD DISK
Use either the space bar or backspace key to choose one of two hard disk options.
Capacity = xxMB
No Drive
5. POWER SAVE OPTIONS
This option enables, disables, and sets the T2000 power saving features.
(1) Resume Mode
This option enables and disables the AutoResume feature.
Boot
Resume
(2) CPU Sleep Mode
This option enables and disables the CPU sleep mode.
Enable
Disable
(3) HDD Auto Off
This option enables and disables the HDD automatic power off. When the AC
adapter is attached, this function is disabled but the setting is unchanged.
3-58
Assigns COM2 to the built-in modem port.
This is the default setting.
Disables the built-in modem port.
Sets the hard disk to its standard setting.
This is the default setting.
Disables the hard disk. The T2000 functions as if a hard disk
is not installed.
Disables the AutoResume feature.
This is the default setting.
Enables the AutoResume feature.
Enables the CPU sleep mode. The computer will automatically shift
to an operating speed of 2MHz when the processor is idle.
This is the default setting.
Disables the CPU sleep mode.