Table of Contents
Advertisement
5.
Remove the optional memory card (B) from the system unit (Figure 4-5).
CAUTION: Do not touch the connecting edge of the memory card. Debris or grease in
the connector may cause memory access problems.
To install the T2000 Optional Memory Card:
1.
Turn the memory card upside down so that the word "insert" and an arrow pointing toward
the connecting edge are facing up.
2.
Carefully slide the memory card into the narrow slot and push gently to ensure a firm
connection. DO NOT force the memory card into place.
3.
Replace the cover; its latches should snap into place.
4.
Turn the computer right side up.
5.
Reconnect the AC adapter, open the display, and turn on the computer.
The T2000 automatically configures all additional memory as expanded memory. Use the SETUP
program to configure your additional memory as expanded memory. You can also use your addi-
tional memory as VDISK.
Figure 4-5 Removing the optional memory card
4-11
Hide quick links:
Advertisement
Chapters
Table of Contents
