4.2 Removing/Replacing the Battery Pack
To remove the T2000 Battery Pack:
1.
Turn off the power to the T2000 and disconnect the AC adapter, power cord, and all exter-
nal cables connected to the T2000.
2.
Facing the back of the computer, pull back the battery release levers (A) and slowly slide
the battery pack (B) toward you until the battery pack stops (Figure 4-1).
3.
Firmly grasp the battery pack and lift it straight up and out of the computer.
To install the battery pack:
1.
Align the battery pack with the battery pack slot on the T2000.
2.
Slide the battery pack toward the computer until the battery pack snaps into place.
Figure 4-1 Removing the battery pack
4-7