4.12 Removing/Replacing the FDD
To remove the FDD:
1.
The battery pack, keyboard, speaker bracket, and top cover assembly must be removed first.
Refer to Sections 4.2, 4.5, 4.7, and 4.9 for instructions on how to remove these items before
proceeding.
2.
Disconnect the FDD cable (A) from PJ16 (B) located on the system board and remove the
two 2.5 x 4 mm screws (C). Lift the FDD chassis (D) and FDD out of the T2000 as one unit
(Figure 4-25).
3.
Remove the three 2.5 x 4 mm (special) screws (E) and then remove the FDD (F) from the
FDD chassis (Figure 4-26).
To reassemble the computer, follow steps 1 through 3 in reverse order.
4-26
Figure 4-25 Removing the FDD chassis
Figure 4-26 Removing the FDD