Table of Contents
Advertisement
This display is an example of the setup options available for the T2000. Notice that selecting the
type of floppy disk drive is not an option.
Press Esc if the setup options displayed accurately reflect your hardware configuration.
3.22.3 Changing SETUP Values
The SETUP values for the T2000 can be changed automatically to their default settings or manu-
ally to user-defined settings.
Automatic Reset
Follow these steps to set all the SETUP values to their default settings.
1.
Press Home to reset all the SETUP values to their factory preset (default) values. The
SETUP program calculates how much conventional and extended memory your T2000 has,
based on whether or not you have a memory expansion module (optional memory card)
installed. SETUP stores the memory value it calculates in configuration memory along
with the factory preset (default) values for the other options.
2.
Confirm that the new SETUP values are correct. To change any option(s), go to the next
section, Manual Reset.
3.
If the new values are correct, press End and the system will reboot.
Manual Reset
Follow these steps to change any of the SETUP option(s) manually.
NOTE: The cursor, shown as a reverse video bar, indicates which option is presently
selected.
1.
Use the
, ,
2.
When the option you want to change is highlighted, press either the space bar or back-
space key to display the alternate values.
3.
When you are finished making changes, press End to record the new values in the configu-
ration memory.
, and
keys (or Enter) to move the cursor between the options.
3-53
Hide quick links:
Advertisement
Chapters
Table of Contents
