Table of Contents
Advertisement
Procedure 4
Connector Check
The HDD is connected to the system board by the HDD board (PCB FT2HDx). Disassemble the
system unit and check the HDD. Refer to Part 4 for instructions on how to disassemble the com-
puter and then perform the following checks.
Check 1
Make sure the HDD board (orange flat cable) is firmly connected to the system
board and HDD.
If the board is disconnected, firmly reconnect it and refer back to Procedures 2 and
3. If the problem still exists, refer to Check 2.
Check 2
The HDD may be defective. Replace the HDD unit with a new one. If the error still
occurs, refer to Check 3.
Check 3
The system board may be damaged. Replace the system board with a new one. If
Table 2-4 HDD error code and descriptions
2-29
Hide quick links:
Advertisement
Chapters
Table of Contents
