Select The Setting - Breville Gourmet Baker BBM400 Instruction Book

TO LOAD THE REMOVABLE
AUTOMATIC FRUIT AND
NUT DISPENSER
The automatic fruit and nut dispenser releases
fruits, nuts, chocolate chips, seeds or other
suitably sized ingredients into the dough at
the right time which is programmed for a
specific time during the knead phase. If added
before this time, excessive kneading will cause
the ingredients to break down rather than
maintain their shape within the dough.
1. Lift open the lid of the automatic fruit
and nut dispenser. Touch the base of the
dispenser to check that it is completely
closed before adding a maximum ½ cup of
dry ingredients.
2. Always remember:
a) Ingredients should be suitably sized so they
do not fall through the vent at the base of
the dispenser. Liquids should not be added
to the dispenser.
b) We recommend separating ingredients that
may stick together, such as raisins and other
fruits, before adding. Sticky ingredients can
be tossed in flour to assist.
c) Glacé (glazed) fruits such as cherries,
ginger, pineapple, etc. should be washed
and well-dried on kitchen paper towel
before adding into the dispenser.
d) Bottled or canned ingredients such as
olives, sun dried tomatoes etc. should be
drained and well-dried on kitchen paper
towel before adding to the dispenser.
e) It is recommended that the dispenser be
cleaned thoroughly with a soft, damp cloth
after each use.
10
3. The fruit and nut dispenser will
automatically release its contents on the
BASIC, BASIC RAPID, WHOLEMEAL,
WHOLEMEAL RAPID, CRUSTY, SWEET,
SUPER RAPID, GLUTEN FREE, KNEAD
& RISE, CAKE, AND BAGUETTE settings.
You may notice the base of the dispenser
flip open during the bread making cycle
even when it is empty. This is normal.
It is the dispenser automatically releasing
ingredients.
NOTE
The AUTOMATIC FRUIT AND NUT
DISPENSER is removable for easy cleaning.
Close the base before gently easing out of the
bread maker.

SELECT THE SETTING

Press the MENU button until the
corresponding number of the desired setting
is displayed on the LCD display. As you scroll
through the settings the time will be displayed
on the screen beside the setting number that
has been selected as an indication of how long
that cycle will take to finish.
The tables below outlines the different settings.
NOTE
Total Setting Times do not include the time for
the KEEP WARM function.