Using The Custom Setting - Breville the Custom Loaf BBM800 Instruction Book

PAge heAder..... OPTIONAL SETTINGS – CUSTOM SETTING

Using the CUSTOM setting

The preset, recommended temperatures and times for the
'preheat', 'knead', 'rise', 'punch-down', 'bake' and 'keep warm'
phases can be modified to suit a specific recipe or your personal
preference, then stored in the memory of the bread maker.
This is particularly useful if you have a favourite recipe that you
regularly bake. Alternatively, for advanced bakers it allows you
to factor in variables such as the brand and type of flour, quality
of the yeast, altitude and climate considerations. For example, in
a humid climate the rising cycles can be reduced.
1. Turn the SELECT push-dial until the indicator on the LCD
screen reaches the CUSTOM setting. Press the push-dial
to select.
2. The LCD screen will indicate 'CUSTOM 1'. This means you
are about to program custom recipe number 1. There are 9
custom recipe spaces for you to program.
TIP
We recommend that for your own reference, you record
the custom recipe number and recipe, along with a log of
the temperatures and times in the charts provided at the
end of this booklet.
3. Press the MODIFY button. The LCD screen will indicate a
flashing 'CUSTOM' and the MODIFY button surround will
flash, indicating that you are in programming mode.
4. Using the SELECT push-dial, select the setting, crust colour,
loaf size and the temperature and times for the 'preheat',
'knead', 'rise', 'punch-down', 'bake' and 'keep warm' phases.
TIP
Phases can only be modified if they are already applicable
to a setting. For example, the BAKE ONLY setting does not
have a 'knead' phase, so this phase cannot be modified.
If, for some reason, you would like to include or modify
a phase that is not applicable to a setting, select the
WHOLE WHEAT setting and use it as a base to program
your custom recipe setting. The WHOLE WHEAT setting
allows you to modify all of the phases.
NOTE
If you accidentally select the wrong temperature or
time, refer to Step 2 'Modifying a Programmed Custom
Recipe', page 34.
5. Once all the phases have been modified to suit your
preferences, 'CUSTOM' and the MODIFY button surround
will no longer flash. The LCD screen will indicate the newly
programmed cycle time.
6. To activate the cycle, press the START | PAUSE button.
7. Alternatively, to activate the Delay Start feature, press the
33