Breville Gourmet Baker BBM400 Instruction Book page 16

CONTROL PANEL MESSAGES
Error Detection
When the START | CANCEL button has been pressed to begin the process and there is a problem
relating to the sensor, beeps will sound and then the LCD screen will display the particular error
message specific to the problem.
There are 4 different error messages:
ERROR CODE PROBLEM
Attempting to use the
E01
bread maker shortly after
a loaf has been baked and
its interior will still be
warm, that is the sensor
temperature will still be
above 50°C.
E00 The bread maker is used
in an extremely cold
environment below -10°C.
EEE
HHH
16
CORRECTION
Unplug the bread maker from the power outlet.
Open the lid, remove the bread pan and allow
the oven cavity sufficient time to cool before
operating the bread maker again.
Place the bread maker in a warmer
environment. Recommended room
temperature 20-25ºC.
Contact your nearest authorised Breville
Service Centre (refer to the back page for
details).
Contact your nearest authorised Breville
Service Centre (refer to the back page for
details).
Ensure the bread maker is turned off by
pressing and holding the CANCEL button.
Remove the power plug from the power outlet.
Allow the bread maker and all accessories to
cool completely before disassembling and
cleaning.