Cordless Settings - AT&T SB67030 User Manual

Cordless Settings

To access the Cordless Settings function:
Cordless Settings
1. Handset
(Not Registered)
2. Headset
(Registered)
Press SELECT to register or
deregister the cordless device.
Use or to scroll then press
SELECT or press 1 - 2.
Figure 52. Cordless Settings
Settings
AT&T SB67030 Deskset User's Guide
1. Press MENU to display the Menu screen shown in
2. Press 2 on the dial pad to display the User Settings menu shown in
page 48.
3. Press 5 to display the Cordless Settings menu shown in Figure 52.
Quick
Dial
Press 1 to register or deregister the Handset.
Press 2 to register or deregister the Headset.
See "To register a cordless device:" on page 51.
See "To deregister a cordless device:" on page 52.
NOTE: The Handset or Headset must be in the Charger, otherwise
NOTE: Only one Cordless Handset and one Cordless Headset can be
registered with the Deskset.
registration cannot proceed. It does not matter which device
starts the registration process first. Even if the cordless
device has been in its Charger, remove and replace the
device right before you press
50
Figure 24 on page 34.
Figure 47 on
on the Deskset.