Set Up Instructions - Stamina UX2 Air Bike Owner's Manual

SET UP INSTRUCTIONS

Place the STAMINA® UX2 Air Bike in the area where it will be used. It is recommended that
the STAMINA® UX2 Air Bike be placed on an equipment mat. The STAMINA® UX2 Air Bike is
approximately 42.5 inches long (max.) x 22.3 inches wide x 45.3 inches tall. (These dimensions may vary
up to one inch.) An area 4 feet wide x 6 feet long is required for safe operation of the STAMINA® UX2
Air Bike. Make sure that adequate space is available for access to and passage around the STAMINA®
UX2 Air Bike.
LEVELING: Adjust the LEVELING CAPS(48) on the FRONT STABILIZER(3) so that the STAMINA®
UX2 Air Bike sits on the floor without rocking. Remove and reposition the LEVELING
CAPS(48) so the flat side of both caps are in contact with the floor.
MOVING: To move the STAMINA® UX2 Air Bike, it is recommended that two people move the bike
together.
FUNCTION INSPECTION:
Visually inspect the STAMINA® UX2 Air Bike to verify that assembly is as shown in the above
illustration. Check the function of the STAMINA® UX2 Air Bike by turning the crank slowly through one
complete revolution to verify that the drive train functions properly. Adjust the TENSION KNOB(27) and
verify that it functions properly and the resistance changes.
CAUTION: Locate and read the WARNING LABEL(73) on the STAMINA® UX2 Air Bike. Make sure
that all users read the WARNING LABEL(73) before using the product.
EQUIPMENT MAT
11