ASSEMBLY INSTRUCTIONS
STEP 5
There is a "R" decal on the RIGHT HANDLEBAR(7) and RIGHT LOWER BAR ASSEMBLY(8, 9). Attach
the LOWER BAR(8) to the RIGHT HANDLEBAR(7) with ROUND HEAD BOLTS(M6x12mm)(59) and
ARC WASHERS(M6)(70). Repeat to assemble the LEFT HANDLEBAR(6) and LEFT LOWER BAR
ASSEMBLY(8, 9).
STEP 6
Slide the AXLE(36) through BUSHINGS(37) into the MAIN FRAME(1). Slide the two BUSHING
WASHERS(38) onto both sides of the AXLE(36). Slide the LEFT and RIGHT HANDLEBARS(6, 7), with the
grips facing outside, onto AXLE(36) and fasten with LARGE WASHERS(M8)(39) and NYLOCK NUTS(M8)
(62). Place a NUT CAP(40) onto the NYLOCK NUT(M8)(62) on both sides.
STEP 7
Slide the two FOAM GRIPS(41) onto the LEFT and RIGHT HANDLEBARS(6, 7).
NOTE: Lubricate the LEFT and RIGHT HANDLEBARS(6, 7) with a small amount of liquid soap for easier
installation of the FOAM GRIPS(41).
L
R
L
R
9