Set Up Instructions - Stamina 15-0876A Owner's Manual

SET UP INSTRUCTIONS

Place the STAMINA® Air Resistance Bike 876 in the area where it will be used. It is recommended
that the STAMINA® Air Resistance Bike 876 be placed on an equipment mat. The STAMINA® Air
Resistance Bike 876 is approximately 46 inches long (max.) x 20.3 inches wide x 46.6 inches tall. (These
dimensions may vary up to one inch.) An area 4 feet wide x 6 feet long is required for safe operation of
the STAMINA® Air Resistance Bike 876. Make sure that adequate space is available for access to and
passage around the STAMINA® Air Resistance Bike 876.
LEVELING: Adjust the LEVELING CAPS(48) on the FRONT STABILIZER(3) so that the STAMINA®
Air Resistance Bike 876 sits on the floor without rocking. Remove and reposition the
LEVELING CAPS(48) so the flat side of both caps are in contact with the floor.
MOVING: To move the STAMINA® Air Resistance Bike 876, it is recommended that two people
move the bike together.
FUNCTION INSPECTION:
Visually inspect the STAMINA® Air Resistance Bike 876 to verify that assembly is as shown in the
above illustration. Check the function of the STAMINA® Air Resistance Bike 876 by turning the
crank slowly through one complete revolution to verify that the drive train functions properly. Adjust the
TENSION KNOB(27) and verify that it functions properly and the resistance changes.
CAUTION: Locate and read the CAUTION LABEL(71) on the STAMINA® Air Resistance Bike 876.
Make sure that all users read the CAUTION LABEL(71) before using the product.
EQUIPMENT MAT
11