Maintenance; Trouble Shooting Guide - Stamina UX2 Air Bike Owner's Manual

MAINTENANCE

The safety and integrity designed into the STAMINA® UX2 Air Bike can only be maintained when the
STAMINA® UX2 Air Bike is regularly examined for damage and wear. Special attention should be given
to the following:
1. Adjust the TENSION KNOB(27) and verify that it functions properly and the resistance changes.
2. Use a wrench to verify that the PEDALS(31, 32) are tightened securely. If tightening is required,
tighten the pedals first, then tighten the THIN NUTS(35) securely.
3. Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts.
Tighten loose nuts and bolts.
4. Verify that the WARNING LABEL(73) is in place and easy to read. Call Stamina Products immediately
at 1-800-375-7520 for a replacement WARNING LABEL(73) if it is missing or damaged.
5. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
6. Worn or damaged components shall be replaced immediately or the STAMINA® UX2 Air Bike
removed from service until repair is made.
7. Only Stamina Products supplied components shall be used to maintain/repair the STAMINA® UX2 Air
Bike.
8. Keep your STAMINA® UX2 Air Bike clean by wiping it off with an absorbent cloth after use.
IT IS NOT NECESSARY TO RETURN ENTIRE BIKE FOR A MONITOR REPAIR.
THE MONITOR IS REMOVABLE FROM BIKE FOR REPAIR OR REPLACEMENT.
PROBLEM
1. No display on meter.
2. No speed or distance displays
on meter.
3. Chain makes popping noise.
4. Bike makes sudden loud noise.
5. Bike rocks as you pedal.
6. Resistance too high.

TROUBLE SHOOTING GUIDE

CAUSE
1. Batteries weak or dead.
1. Pickup wire not connected to
meter.
2. Speed pickup not working
properly.
3. Meter not working properly.
1. Chain is too loose.
Chain is too loose and hits fan.
1.
1. Bike is not level.
1. Fan needs adjustment.
15
CORRECTION
1. Replace batteries. (Use two AA.)
1. Securely plug pickup wire into
the connecting wire on the meter.
2. Replace speed pickup.
3. Replace meter.
1. Adjust chain - See page 16 chain
adjustment.
Adjust chain
1.
1. Adjust leveling caps on front
stabilizer until bike is level.
1. Adjust fan per instructions on
page 16 and 17.