Regulatory Options; Band Selection; System Options - Symbol MC909X Integrator Manual

Regulatory Options Dialog Box
Figure 4-46

Regulatory Options

Table 4-24
Field
Settings
Enable 802.11d

Band Selection

The settings identify the frequency bands to scan when finding WLANs. These values refer to
Band Selection
the 802.11 standard networks.
Select one band for faster access when scanning for WLANs.
NOTE
Band Selection Dialog Box
Figure 4-47
Band Selection Options
Table 4-25
Field
5GHz Band The
2.4GHz Band The
and 802.11g).
Tap to save the settings or tap X to discard any changes.
Save

System Options

Use to set miscellaneous system setting.
System Options
Select the country from the drop-down list. To connect to a profile, the profile country
must match this setting, or the AP country setting if you selected the Enable 802.11d
check box.
The WLAN adapter attempts to retrieve the country from APs. Profiles which use
Infrastructure mode can only connect if the country set is the same as the AP country
settings or if the profile country setting is Allow Any Country. All APs must be
configured to transmit the country information.
application list includes all networks found in the 5 GHz band (802.11a).
Find WLANs
application list includes all networks found in the 2.4 GHz band (802.11b
Find WLANs
Wireless Applications 4 - 37
Description
Description