Window Buttons, Menus, and Trash Can (Right Column)
The buttons, drop-down menus, and trash can icon on the right side of the matrix window
perform the following functions:
•
Power
powered on and off via software.
•
Executive Mode
view-only mode functions (lock mode 2). When executive mode is enabled, the dot to
the right of this button is red.
•
menu — Displays a list of up to 10 rooms. From this list you can select a room
Room
to display in the window.
NOTE:
•
Presets
presets (10 rooms with 10 presets per room). From this list you can select a preset to
display in the window. You can either activate the selected preset by clicking
delete it by clicking
•
Go
— Activates the selected preset as the current configuration.
•
Save as...
number when prompted to do so.
•
Delete
•
— Allows you to save to file any changes made to the displayed configuration.
Take
•
Cancel
•
Trash can
undo all ties associated with that input or output.
Window Menus
The menu bar on the matrix window contains the following pull-down menus.
File menu
The
menu contains the following options:
File
•
Save MATRIX settings as
up to 132 presets (32 global and 100 room presets),
plus the last active setting (preset #0), to a file. Saved
settings include assigned icons and icon captions.
•
Restore MATRIX settings from
activates a previously saved settings file.
•
Save This-Session's settings
settings as
•
Restore Last-Session's settings
saved during the last session. If you saved the changes from the previous session
when you last exited the program, the ties from that session are loaded.
•
Select Printer
drivers. From this list you can select the target printer to print tie maps.
•
Print Tie Map
•
— Closes the Matrix Switcher Control Program.
Exit
— This button is unavailable for DXP switchers, because the DXP cannot be
— Allows you to lock out front panel operations, except for the
A room is a subset of outputs that are logically related to each other, as
determined by the operator. The DXP switcher supports up to 10 rooms,
each of which can consist of 1 to 8 outputs.
menu — Displays a list of up to 32 global presets and up to 100 room
.
Delete
— Allows the current set of ties to be saved as a preset. Enter the preset
— Deletes the selected preset.
— Returns to the previous screen, undoing any changes you have made.
— Drag and drop from an input or output box to the trash can icon to
— Saves a complete set of
, but you are not able to specify a file name to which it will be saved.
— Displays a submenu of the printers for which your computer has
— Prints the tie set that is displayed on the screen.
DXP DVI Pro and DXP HDMI Series • Matrix Software
— Loads and
— Performs the same function as
— Loads the icons and icon captions that were
Go
or
Save MATRIX
86